+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Pickup Bug in 66.84.0.15 (/showthread.php?tid=42580)
Pickup Bug in 66.84.0.15 - rickstinson - 03-26-2019 01:20 PM
Hi,
tested with 41-S + T46-S with Firmware 66.84.0.15
Phone 1, EXT 10
Phone 2, EXT 11
Both Phones uses BLF to monitor the other EXT.
-> Inbound Call to EXT10
-> BLF-Led for EXT10 on EXT 11 is blinking
-> EXT11 is pressing the BLF Button
-> EXT11 is lifting the handset
= Pickup is working
-> Inbound Call to EXT10
-> BLF on EXT 11 is blinking
-> EXT11 lifts the handset and press the BLF Button
= The phone is calling EXT10 instead of pickup
Seems to be a bug?
Everything is working fine with T41P and 36.83.0.50
RE: Pickup Bug in 66.84.0.15 - Mike_Yealink - 05-24-2019 06:21 AM
HI
This problem requires you to provide T41P diagnostic files for analysis.
You can refer to the following links for diagnostic files
http://support.yealink.com/faq/faqInfo?id=707
For better service, we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.