+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Disable call forwarding feature. (/showthread.php?tid=4257)
Disable call forwarding feature. - TruckingExp - 08-14-2015 12:46 AM
Is it possible to disable the automatic call forwarding feature completely? Specifically the Always Forward, Busy Forward, and No Answer Forward features. Our users are abusing these features or forgetting to turn them on and off. I would like to handle call forwarding from the PBX (FreePBX if it matters). Is it possible to do this? We have a few different models here with various firmware.
T26P
T23G
T32G
T46G
T48G
Thank you.
RE: Disable call forwarding feature. - Karl_Yealink - 08-14-2015 02:10 AM
Hi,
You can try the parameter below through auto privisioning.
features.fwd.allow = 0
RE: Disable call forwarding feature. - TruckingExp - 08-14-2015 02:19 AM
Thank you for the response. Is there another way to do it without auto provisioning? We don't use auto provision.
If I download the config file and just add that line to the bottom, then re-upload to the phone, will that work?
RE: Disable call forwarding feature. - Karl_Yealink - 08-14-2015 04:19 AM
Hi,
It can work,but the verison muet be higher than V73 or V73.