+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Turn off warnings on screen in V84 (/showthread.php?tid=42568)
Turn off warnings on screen in V84 - avayax - 03-21-2019 11:59 AM
There is a new feature in V84, that would display warnings on the screen in case e.g. an account wasn't registered successfully.
Is there a way to turn those off, both on the GUI, but also via configuration files?
RE: Turn off warnings on screen in V84 - complex1 - 03-21-2019 12:30 PM
(03-21-2019 11:59 AM)avayax Wrote: There is a new feature in V84, that would display warnings on the screen in case e.g. an account wasn't registered successfully.
Is there a way to turn those off, both on the GUI, but also via configuration files?
Hi,
As General Data Protection Regulation required, there should be a warning icon in the status bar warning information on the Status screen when the default password is used.
You can go to "Menu > Status > Warnings > Clear Icon" on the Phone User Interface to disable the phone to display warnings.
The parameters in the auto provision template are described as follows:
phone_setting.warnings_display.mode =
Hope this will help.