+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: 802.1x EAP-TLS (/showthread.php?tid=4254)
802.1x EAP-TLS - Katona - 08-13-2015 05:24 PM
Hi!
I have a Yealink T-19 (firmware version is 31.72.0.75).
I try to configure 802.1x EAP-TLS via web interface.
802.1x mode - EAP-TLS
Identity - Phone
CA certificate - CA root certificate (that was generic on my SSL)
Device Certificate - user certificate
But when I connected it to the switch Wireshark show that there is no EAPOL-Start messages.
What is a problem?