+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Disable Power LED completely (/showthread.php?tid=42518)
Disable Power LED completely - mhcsoft - 03-02-2019 10:16 AM
Hi,
how to disable the power LED completely? I've set:
phone_setting.common_power_led_enable = 0
phone_setting.talk_and_dial_power_led_enable = 0
phone_setting.mail_power_led_flash_enable = 0
phone_setting.ring_power_led_flash_enable = 0
phone_setting.mute_power_led_flash_enable = 0
phone_setting.hold_and_held_power_led_flash_enable = 0
phone_setting.missed_call_power_led_flash.enable = 0
without success. It still blinks at least when there are missed calls.
TIA
RE: Disable Power LED completely - complex1 - 03-02-2019 12:54 PM
(03-02-2019 10:16 AM)mhcsoft Wrote: Hi,
how to disable the power LED completely? I've set:
phone_setting.common_power_led_enable = 0
phone_setting.talk_and_dial_power_led_enable = 0
phone_setting.mail_power_led_flash_enable = 0
phone_setting.ring_power_led_flash_enable = 0
phone_setting.mute_power_led_flash_enable = 0
phone_setting.hold_and_held_power_led_flash_enable = 0
phone_setting.missed_call_power_led_flash.enable = 0
without success. It still blinks at least when there are missed calls.
TIA
Hi,
Please manually disable the Power LED indicator using the Web UI and try again.
(Features > Power LED > and set all fields to “Disabled”)
If this will work then review the provisioning template and check for errors.
Hope this will help.
RE: Disable Power LED completely - mhcsoft - 03-02-2019 12:59 PM
(03-02-2019 12:54 PM)complex1 Wrote: Hi,
Please manually disable the Power LED indicator using the Web UI and try again.
(Features > Power LED > and set all fields to “Disabled”)
If this will work then review the provisioning template and check for errors.
Hope this will help.
When I look at "Features > Power LED" on a provisioned phone all fields are set to "Disabled".
Did so, provisioning template is identically to mine.
RE: Disable Power LED completely - complex1 - 03-02-2019 01:31 PM
(03-02-2019 12:59 PM)mhcsoft Wrote:(03-02-2019 12:54 PM)complex1 Wrote: Hi,
Please manually disable the Power LED indicator using the Web UI and try again.
(Features > Power LED > and set all fields to “Disabled”)
If this will work then review the provisioning template and check for errors.
Hope this will help.
When I look at "Features > Power LED" on a provisioned phone all fields are set to "Disabled".
Did so, provisioning template is identically to mine.
Hi,
Please tell me what firmware version the phone is running?
Please reset the phone to factory default, re-provisioning the phone and try again.
Hope this will help.
RE: Disable Power LED completely - mhcsoft - 03-02-2019 02:55 PM
(03-02-2019 01:31 PM)complex1 Wrote: Hi,
Please tell me what firmware version the phone is running?
Please reset the phone to factory default, re-provisioning the phone and try again.
Hope this will help.
I've done factory resets more than once already :-) The problem exists at the following devices for me:
T46G - FW: 28.83.0.50
T46S - FW: 66.84.0.15
TIA
RE: Disable Power LED completely - complex1 - 03-02-2019 04:21 PM
Hi,
As I can not reproduce the problem, I suggest to create a support ticket at Yealink and refer to this thread.
https://ticket.yealink.com/
RE: Disable Power LED completely - mhcsoft - 03-02-2019 07:08 PM
Done: https://ticket.yealink.com/page/question-detail.html?id=82262