Yealink Forums
T29G DTMF Duration - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+--- Thread: T29G DTMF Duration (/showthread.php?tid=42443)



T29G DTMF Duration - mightychrisgill - 02-03-2019 09:09 PM

Hello.
Can the DTMF tones be configured to sound for as long as the button is pushed?? I am trying to get a gsm gate intercom controller to accept a tone ( 1 button ) to trigger the gate to open. The default setting is not quite long enough for the unit to recognise the tone.
Thanks


RE: T29G DTMF Duration - complex1 - 02-04-2019 12:50 PM

(02-03-2019 09:09 PM)mightychrisgill Wrote:  Hello.
Can the DTMF tones be configured to sound for as long as the button is pushed?? I am trying to get a gsm gate intercom controller to accept a tone ( 1 button ) to trigger the gate to open. The default setting is not quite long enough for the unit to recognise the tone.
Thanks

Hi,

With next parameter you can configure the duration time (in milliseconds) for each digit when a sequence of DTMF tones is played out automatically.
Integer from 0 to 700, default is 100.
This only can be accomplished with auto-provision.
features.dtmf.duration =

Hope this will help.