Yealink Forums
Creating Paging Groups - Printable Version

+- Yealink Forums (
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+--- Thread: Creating Paging Groups (/showthread.php?tid=42440)

Creating Paging Groups - julviso - 02-01-2019 08:04 PM

I have a customer who has two businesses under one account. I have set up one business using the 100 range extensions and the other is using the 200 range extensions.

I want to create two buttons -Page 1 and Page 2-, so, when Page 1 is pressed it calls the extensions on the 100 range and when Page 2 is pressed it calls all the extensions in the 200 range.

I am using all Yealink T46S.

Can anyone help me set this up?

Thanks in advance for your help!

RE: Creating Paging Groups - jolouis - 02-04-2019 02:36 PM

If you are using Multicast paging then it is very easy:
Just configure all the phones in the 100 group to listen to one multicast address, and have a "Multicast page" button set to transmit to the address. Then configure the phones in the 200 group to listen on a different address.