Yealink Forums
Firewall Settings for Auto Provisioning - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Firewall Settings for Auto Provisioning (/showthread.php?tid=42430)



Firewall Settings for Auto Provisioning - ChristophWHAT - 01-30-2019 08:15 AM

Hello,

I have a question regarding the Yealink Redirection Server.

We are using Yealink T46G / T46P phones.

We have very strict firewall settings, and the autoprovisioning for Yealink isn't working.

If I use the mass deployment link (from VoIP provider) and autoprovision manually it works and the phones connect to tftp and pull the firmware+config files.

I couldn't find the address of the redirection server from Yealink in all the manuals.
What is the port and IP adress that the Yealink phone connects on startup? Is there a firewall configuration manual for Yealink?

Best regards,
Christoph


RE: Firewall Settings for Auto Provisioning - jolouis - 01-30-2019 10:02 PM

According to the email I got from Yealink when they did the recent RPS conversion (September 2018):

Quote:To avoid any service disruption, please whitelist the following domains and/or IP addresses:

https://dm.yealink.com
https://api-dm.yealink.com
https://rps.yealink.com
52.71.103.102
35.156.148.166
106.15.89.161
47.75.58.202
47.89.187.0

Hopefully that helps? Otherwise just do a packet trace on a Yealink phone when you power it on; should be pretty obvious.[/quote]


RE: Firewall Settings for Auto Provisioning - ChristophWHAT - 02-04-2019 12:47 PM

Thank you, great response, these settings work! CoolIdea