Change Display Name of Line on Handset - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W60B(Wireless) (/forumdisplay.php?fid=59) +--- Thread: Change Display Name of Line on Handset (/showthread.php?tid=42429) |
Change Display Name of Line on Handset - Libertis - 01-29-2019 10:23 PM By our SIP provider we have cryptic Register and User Name (same). How can handset be configured that selecting lines shows label and not register name? RE: Change Display Name of Line on Handset - complex1 - 02-28-2019 09:01 AM (01-29-2019 10:23 PM)Libertis Wrote: By our SIP provider we have cryptic Register and User Name (same). Hi, Please go to the Web UI > Features > General Information > Display Method on Dialing, choose Label and save the configuration. Then the Line Status will show the Label instead of the User Name. Hope this will help. RE: Change Display Name of Line on Handset - Libertis - 02-28-2019 11:54 AM Thank you, but on our latest firmware of W60B there is no such line, which I searched already before? (02-28-2019 09:01 AM)complex1 Wrote: Hi, RE: Change Display Name of Line on Handset - complex1 - 02-28-2019 12:36 PM (02-28-2019 11:54 AM)Libertis Wrote: Thank you, but on our latest firmware of W60B there is no such line, which I searched already before? Hi, If you are running version 83.10 it should be there. See Admin Guide on page 93 http://download.support.yealink.com/download?path=ZIjHOJbWuW/DFrGTLnGyptRqysyHm94L3U1Rak6GTGDanCRWpg4f/f04E7BSVOgUyyF/OtEgHWjGKVGdIqU7vjf3yLyRS78wXG8HM27hStyzvZ6DxvtIdecMmBlOsE4BlZ38vuHmlQC678F3qzkCzplusSymbolxvbrbRSYXUn8EBkJQIUKBa0ciEXyLmplusSymbolRsr87weEv7t RE: Change Display Name of Line on Handset - Libertis - 02-28-2019 01:00 PM We have firmware 77.83.0.25 http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=206 Your link isn't working, do you refer to 'Yealink W60P DECT IP Phone Administrator Guide_V81_31.pdf'? (02-28-2019 12:36 PM)complex1 Wrote: Hi, RE: Change Display Name of Line on Handset - complex1 - 02-28-2019 04:15 PM (02-28-2019 01:00 PM)Libertis Wrote: We have firmware 77.83.0.25 No, I was referring to Yealink W53P & W60P & W41P DECT Phones Administrator Guide_V83_10.pdf RE: Change Display Name of Line on Handset - Libertis - 02-28-2019 06:17 PM SOLVED Thank you very much, found it, also on latest firmware. Sorry, browser search was set to match words on CTRL-F, shows red unless it finds full word 'display', lazy I am, I stopped typing at 'disp' - good that is solved too :-) (02-28-2019 04:15 PM)complex1 Wrote: No, I was referring to RE: Change Display Name of Line on Handset - complex1 - 02-28-2019 07:30 PM Glad to see the issue has been resolved now and thank you for updating the thread. |