How to read base data ? - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W56P(Wireless) (/forumdisplay.php?fid=57) +--- Thread: How to read base data ? (/showthread.php?tid=42342) |
How to read base data ? - oliv - 12-19-2018 02:18 PM Hello, One customer sent be back a defective W56H handset. This handset was associated with a W56B. (The issue was it didn't ring anymore). When I enter this phone Settings/Registration/Register Handset menu, it display 4 Base 1/Base 2/Base 3/Base 4 entries. In Base 1 entry, I can currently read something like 02008-1C376h. What this 02008-1C376h value mean ? Is it supposed to match a MAC address ? An IPEI ? Something else ? Best regards RE: How to read base data ? - complex1 - 12-20-2018 08:07 AM (12-19-2018 02:18 PM)oliv Wrote: Hello, Hi, Every DECT handset has its own unique IPUI number. Using this IPUI number, you can assign a SIP account to an DECT handset. During DECT handset registration, the IPUI number is sent to the DECT base to identify the handset. Hope this will help. |