Yealink Forums
W52P died on me - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Dect Phone Series (/forumdisplay.php?fid=6)
+--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23)
+--- Thread: W52P died on me (/showthread.php?tid=4234)



W52P died on me - simon templar - 08-10-2015 11:52 PM

So out of the blue, my W52P can't get IP address anymore, and just died on me. It is powered through POE and worked perfectly until a couple of weeks ago. The unit is probably 3 years old. Did this happen to anyone ? Is there a fix ? Or should I just toss everything and buy another brand ?

Thank you.


RE: W52P died on me - Karl_Yealink - 08-11-2015 06:07 AM

Hi,
Would you please try hard reset with following steps
1.    Disconnect power from base.
2.    Press Paging button on base, at the meantime, connect with power supplier.​ You may find all the light lit one by one
3.    Release Paging button, disconnect power, connect power again.


RE: W52P died on me - simon templar - 08-11-2015 09:27 PM

hi

I tried that. All the lights lit one by one.
After I released the paging button , disconnected, and connected again, only the power light goes on.
Network does not, and wifi devices does not.

Any other trick ?

Thank you.


RE: W52P died on me - complex1 - 08-11-2015 10:53 PM

Quote:3. Release Paging button, disconnect power, connect power again.
No offense, but personally I do first disconnect the power, then release Paging button, than power the base again.

The Registration LED (wifi devices) will illuminates solid green when there is at least one handset registered to the base station.
So after the hard reset you have to register the handset(s) again.
Now you can view the system status on your handset.

simon templar Wrote:So out of the blue, my W52P can't get IP address anymore
If you are using a managed switch, than maybe the switch disabled(?) the network port to the W52P base.
Restart the switch.


RE: W52P died on me - simon templar - 08-11-2015 11:45 PM

It's a managed switch, but I did not touch the conf for months. That W52P crapped on my about two weeks ago. Network traces don't show any activity from its mac address. No DHCP request, nothing. It's dead.


RE: W52P died on me - complex1 - 08-11-2015 11:58 PM

Quote:It's a managed switch, but I did not touch the conf for months.
Did you restart the switch? No more, no less. Maybe this resolve your issue.


RE: W52P died on me - simon templar - 08-12-2015 03:45 AM

Yes..


RE: W52P died on me - simon templar - 08-21-2015 04:08 AM

So I guess I can trash my handsets and base ?


RE: W52P died on me - Karl_Yealink - 08-21-2015 08:19 AM

Hi,
It maybe a hardware problem.
Please contact with your vender for help.