Missing Directory settings - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Missing Directory settings (/showthread.php?tid=42324) |
Missing Directory settings - GroupOne_Support - 12-11-2018 10:18 PM Good afternoon Yealink forums, Have you ever seen this issue where the Directory is completely missing for disabled and enabled? I am not even able to assign default directory when the user hits the directory button. account.1.enable = 1 account.1.auth_name = 3803 account.1.user_name = 3803 account.1.password = [REDACTED] account.1.shared_line = 0 account.1.subscribe_mwi = 1 account.1.sip_server.1.address = [REDACTED] account.1.sip_server_host = [REDACTED] account.1.sip_server.2.address = %NULL% account.1.outbound_port = 0 account.1.outbound_host = [REDACTED] account.1.outbound_proxy_enable = 1 account.1.transport = 0 account.1.naptr_build = 0 linekey.1.line = 1 linekey.1.type = 15 account.2.enable = 0 account.3.enable = 0 account.4.enable = 0 account.5.enable = 0 account.6.enable = 0 account.7.enable = 0 account.8.enable = 0 account.9.enable = 0 account.10.enable = 0 account.11.enable = 0 account.12.enable = 0 #Time set by pulling timezone from the Line 1 users's timezone on the NMS server local_time.time_zone = -8 local_time.time_zone_name = United States-Pacific Time #Below are options and overrides account.1.display_name = [REDACTED] account.1.fallback.redundancy_type = 1 account.1.label = 3803 account.1.sip_server_type = 0 auto_provision.power_on = 1 auto_provision.repeat.enable = 1 auto_provision.repeat.minutes = 1440 custom.features.redial_via_local_sip_server.enable = 1 directory_setting.history.enable = 0 directory_setting.local_directory.enable = 0 directory_setting.remote_phone_book.enable = 1 directory_setting.url = http://[REDACTED]/frm/yealink_directory_setting.xml distinctive_ring_tones.alert_info.1.ringer = 3 distinctive_ring_tones.alert_info.1.text = Internal features.redial_via_local_sip_server.enable = 1 features.remote_phonebook.enable = 1 features.remote_phonebook.flash_time = 3600 features.voice_mail_tone_enable = 0 linekey.1.label = Park linekey.1.line = 1 linekey.1.pickup_value = %NULL% linekey.1.type = 11 linekey.1.value = *** local_time.ntp_server1 = pool.ntp.org local_time.ntp_server2 = time.nist.gov local_time.summer_time = 2 local_time.time_format = 0 phone_setting.warnings_display.mode = 0 programablekey.1.label = %NULL% programablekey.1.line = 1 programablekey.1.pickup_value = %NULL% programablekey.1.type = 28 programablekey.1.value = %NULL% programablekey.1.xml_phonebook = %NULL% programablekey.2.label = %NULL% programablekey.2.line = 0 programablekey.2.pickup_value = %NULL% programablekey.2.type = 61 programablekey.2.value = %NULL% programablekey.2.xml_phonebook = -1 remote_phonebook.data.1.name = Company Directory remote_phonebook.data.1.url = [REDACTED] transfer.dsskey_deal_type = 1 voice_mail.number.1 = 5001 voice_mail.number.10 = 5001 voice_mail.number.11 = 5001 voice_mail.number.12 = 5001 voice_mail.number.2 = 5001 voice_mail.number.3 = 5001 voice_mail.number.4 = 5001 voice_mail.number.5 = 5001 voice_mail.number.6 = 5001 voice_mail.number.7 = 5001 voice_mail.number.8 = 5001 voice_mail.number.9 = 5001 RE: Missing Directory settings - digiaustin - 08-17-2021 12:52 AM Hey! I just had this happen to me too. Looks like an contacts XML file caused my issue. I attempted to push a contacts xml file via autoprovision but instead it just wiped out all directory options. All the ones that should be there are just gone. Ever find out a fix? I'm gonna try a factory reset here in a second. |