+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Multicast Paging - Metaswitch EPP missing "Channel" (/showthread.php?tid=42273)
Multicast Paging - Metaswitch EPP missing "Channel" - ahull - 11-26-2018 08:19 PM
Hi There,
I'm testing Yealink T4x and W60B phones with my Metaswitch. Endpoint packs Yealink_T4XS_certified.6.zip and Yealink_W60B_certified.2.zip
Everything is going very well, but I see a discrepancy with setting up multicast paging groups. The W60B provisioning interface has a field for paging "channel" on each listen/page group, but the T4xS endpoint pack does not have this field.
If I log in to the web interface of the T46S that I'm testing with, I see there is a "Channel" dropdown menu in the multicast paging interface. The channel value is required for multicast paging interop with Polycom VVX.
Can Yealink Devs add the channel field in the next version of the Endpoint Pack?
Is there a work around to use in the meantime?
Thanks!
Andy Hull
RE: Multicast Paging - Metaswitch EPP missing "Channel" - ahull - 11-27-2018 12:57 PM
For anyone else running into this issue:
Adding multicast.paging_address.X.channel or multicast.listen_address.X.channel as Free Settings in the SIP Provisioning system works for now.
Andy