+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: custom ringtone with new BLF audio alert (/showthread.php?tid=42269)
custom ringtone with new BLF audio alert - Chris Barron - 11-26-2018 09:59 AM
REPOST IN DIFFERENT SECTION
Chaps,
this is related to the feature request for BLF audio alert I raised. that was fulfilled in firmware 66.84.0.10 - it works really well, BUT.
I;ve tried to attach a custom ring tone (actually a doorbell sound) and this does not work. The wav file for the custom ring works as a direct ring on on another phone at a lower software, so I think my wav file is ok.
This works ok with Ring8.wav
features.pickup.blf_audio_enable = 1
features.pickup.blf_visual.list =
features.pickup.blf_audio.list = 2001
features.blf.ring_type = Ring8.wav
But when i substitute the custom ring file
fetures.blf.ring_type = Doorbell3.wav
No sound emerges - I;ve checked the phone to see that the custom file is loaded.
I have a feeling it should be
fetures.blf.ring_type = XXXXXX: Doorbell3.wav
but cant find anything in the admin guide.
chris