Problems with deactivating of call-forwarding (T48G) - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Problems with deactivating of call-forwarding (T48G) (/showthread.php?tid=42220) |
Problems with deactivating of call-forwarding (T48G) - badsoden - 11-07-2018 04:48 PM Hello, I have a problem with deactivating of call-forwarding (off::Always Forward) after last firmware-update. I read in this Issue the same problem (for T46G): http://forum.yealink.com/forum/showthread.php?mode=linear&tid=41437&pid=#pid Our company have the same problem, but with T48G. Our telefons have the current firmware '35.83.0.50' (Hardware Version: 35.0.0.0.0.0.0). Activating of call-forwarding works fine. After the last firemware-update we have problems with deactivating of call-forwarding. The Problem is the fact, that yealink send astrisk '*73NUMBER'. The older firmware sent astrisk only '*73' without NUMBER. Is there a newer firmware, that solves this problem? Best Regards EP |