+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: How to specify an IP range in the "PushXML allowed server" field? (/showthread.php?tid=42192)
How to specify an IP range in the "PushXML allowed server" field? - nSolvePaul - 10-30-2018 11:08 AM
Rather than entering the exact IP of the Push XML Server can I enter a range?
e.g. 192.168.x.x?
RE: How to specify an IP range in the "PushXML allowed server" field? - jolouis - 10-31-2018 01:37 PM
Directly from the Administrators Guide manual:
Quote:Page 464 - push_xml.server Permitted Values:
Blank -The phone will reject HTTP POST messages from any server.
any -The phone will accept HTTP POST messages from any server.
IP address or domain name - Multiple addresses are separated by commas. (for example,10.1.4.3,10.1.4.23); Support asterisk wildcard, each asterisk represents a field of the IP address (10.10.*.* represents
10.10.0.0 to 10.10.255.255).
RE: How to specify an IP range in the "PushXML allowed server" field? - nSolvePaul - 11-02-2018 09:59 AM
(10-31-2018 01:37 PM)jolouis Wrote: Directly from the Administrators Guide manual:
Quote:Page 464 - push_xml.server Permitted Values:
Blank -The phone will reject HTTP POST messages from any server.
any -The phone will accept HTTP POST messages from any server.
IP address or domain name - Multiple addresses are separated by commas. (for example,10.1.4.3,10.1.4.23); Support asterisk wildcard, each asterisk represents a field of the IP address (10.10.*.* represents
10.10.0.0 to 10.10.255.255).
Thank you I'd missed that