incoming fake call - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23) +--- Thread: incoming fake call (/showthread.php?tid=4217) |
incoming fake call - ipv6fill - 08-04-2015 05:30 PM i have a w52p under my isp router, i didn't open with forward any port, the registration work well, and conversation is ok. BUT i receive fake call like 101,000... how i can stop it ? i can set some for receive call only from my sip provider ? RE: incoming fake call - complex1 - 08-04-2015 06:03 PM Hi, You can try using another Local SIP Port number. E.g. 5070 instead of 5060. or Modify the auto-provisioning template with: Code: #!version:1.0.0.1 Code: #!version:1.0.0.1 To make these parameters become effective, you have to reprovisioning the phone with this modified template. RE: incoming fake call - ipv6fill - 08-04-2015 06:05 PM is not possible with gui ?? :-(( RE: incoming fake call - complex1 - 08-04-2015 06:51 PM (08-04-2015 06:05 PM)ipv6fill Wrote: is not possible with gui ?? :-(( No. Sorry. Only the content of the Local SIP Port can be changed via GUI in Account -> Accountx -> Advanced RE: incoming fake call - ipv6fill - 08-04-2015 08:47 PM i'm sorry for my dummy questions, but i can download and later after modify upload configuration file... have you some tips for this ?? RE: incoming fake call - complex1 - 08-04-2015 09:06 PM Hi, There are no dummy questions, only stupide answers. I am using the W52P with a PBX, so I know how the provisioning the phone through the PBX. A standalone provisioning through a Provisioning Server I have never did before. Maybe this document will help you with this Yealink_W52P_IP_DECT_Phones_Auto_Provisioning_Guide_V73_27.pdf http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=25 |