push device config to phone fails (Executed failed,Can't connect to server) - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Yealink Device Management Platform (/forumdisplay.php?fid=61) +--- Thread: push device config to phone fails (Executed failed,Can't connect to server) (/showthread.php?tid=42122) |
push device config to phone fails (Executed failed,Can't connect to server) - haroem - 09-26-2018 03:52 PM in-band provisioning enabled in skype4b 2015 on-prem. just trying to use YDMP to centrally manage device config in a one to many publish scenario. pushing test messages works fine, remote reboots are fine. phones themselves work fine. any chance to get a better idea of why config won't push to phones? Thanks. RE: push device config to phone fails (Executed failed,Can't connect to server) - haroem - 09-27-2018 06:13 PM software was installed on another IP and moved to current IP. IP was updated using instructions on http://forum.yealink.com/forum/showthread.php?tid=41888 this appears to make the system look like it's working but not actually working. a full uninstall and install of the newest version (2.0.0.25) resolved the issue. please consider removing the suggestion to change the IP in dm.cfg directly or at least add a warning that you might have to reinstall the software anyway if things don't work properly. the best thing would be to add an IP interface to the GUI so we can just change IP addresses like normal people instead of reinstalling software every time an address changes. |