Yealink Forums
T46S + EHS36 + Jabra 920 = Long delay - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Accessories (/forumdisplay.php?fid=28)
+--- Thread: T46S + EHS36 + Jabra 920 = Long delay (/showthread.php?tid=42113)



T46S + EHS36 + Jabra 920 = Long delay - snusnu - 09-24-2018 12:33 PM

Hi folks,

we are using a combination of T46S, EHS36 and Jabra 920. Everything is working ok, but there is a long delay (3-5 seconds) to end a call by pressing the designated switch on the Jabra 920. We almost set the call control mode fix to DHSG but that didn't changed anything. With an old Alcatel telephone the same headset is running very well.

So do you have any ideas to get rid of this annoying delay?

T46S Firmware Version: 66.83.0.35
EHS36 Hardware Version: 48.16.0.0
EHS36 Firmware Version: 4.16.0.0


RE: T46S + EHS36 + Jabra 920 = Long delay - complex1 - 09-25-2018 07:32 AM

(09-24-2018 12:33 PM)snusnu Wrote:  Hi folks,

we are using a combination of T46S, EHS36 and Jabra 920. Everything is working ok, but there is a long delay (3-5 seconds) to end a call by pressing the designated switch on the Jabra 920. We almost set the call control mode fix to DHSG but that didn't changed anything. With an old Alcatel telephone the same headset is running very well.

So do you have any ideas to get rid of this annoying delay?

T46S Firmware Version: 66.83.0.35
EHS36 Hardware Version: 48.16.0.0
EHS36 Firmware Version: 4.16.0.0

Hi,

Please upgrade the T46S Firmware to v84 and try again.
http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=143

Hope this will help.