+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: yealink 56A forward (/showthread.php?tid=42086)
yealink 56A forward - ReneYealink - 09-10-2018 07:47 PM
Hello.
with the following parameters we try to disable the forwarding for busy and no answer on a T56A, the setting has no effect.
forward.always.enable=1
forward.busy.enable=0
forward.no_answer.enable=0
Only the parameter
features.fwd.allow=0
works but all redirections will be switched off.
How to switch off the redirection for busy and no_answer on a Yealink T56A via Auto Provisioning ?
Thanks
RE: yealink 56A forward - complex1 - 09-10-2018 08:42 PM
(09-10-2018 07:47 PM)ReneYealink Wrote: Hello.
with the following parameters we try to disable the forwarding for busy and no answer on a T56A, the setting has no effect.
forward.always.enable=1
forward.busy.enable=0
forward.no_answer.enable=0
Only the parameter
features.fwd.allow=0
works but all redirections will be switched off.
How to switch off the redirection for busy and no_answer on a Yealink T56A via Auto Provisioning ?
Thanks
Hi,
Please make sure the parameter “features.fwd_mode” is set to 0 and do not forget to set a destination number configured by the parameter "forward.always.target"
Hope this will help.