Latest software - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23) +--- Thread: Latest software (/showthread.php?tid=42076) |
Latest software - boardshorst - 09-01-2018 06:36 AM Yealink site http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=25 shows Base for W52P&W56P-25.81.0.10.rom W52H-26.81.0.30.rom as latest roms 3CX link to your site https://www.yealink.com/products_48.html shows Base for W52P&W56P-25.81.0.30 W52H for W60P-26.81.0.40 Confused as to which to use - running .10 on W52P and .30 on W52H's. Having to unplug power (sometimes multiple times to get it to come back) on regular basis - did a factory reset and reconfigure about a month ago but still a problem. Tried to export configuration but get a zero byte file. Wonder if Base for W52P&W56P-25.81.0.30 addresses some of this?? RE: Latest software - complex1 - 09-01-2018 09:49 AM (09-01-2018 06:36 AM)boardshorst Wrote: Yealink site http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=25 shows Hi, I do not know what differences are between these firmwares, but as far as I know the firmware found on the 3CX link, are for devices connected to 3CX to give a better interoperability. For “normal” use the .10 and .30 firmware should be fine. Please try a other power supply and check if the issue stay away. Hope this will help. |