+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T41S screen blinking (/showthread.php?tid=42040)
T41S screen blinking - Prozper - 08-16-2018 02:23 PM
Hi everyone,
I have just deployed 10 YL T41S devices at a clients office and they all work but the screens lit up every 30-40 seconds.
Looks like something is not correct yet.
Someone got an idea what this might be?
Keep alive function?
They are part of a VLAN and they have all been assigned to this VLAN.
Im working with these Unifi products:
1x USG pro 4
2x USW 24 ports 250W
9x UAP
Thanks!
RE: T41S screen blinking - jolouis - 08-17-2018 02:45 PM
There is an option to wake the screen when BLF states change. If you are using BLFs that might be the issue. Check the under the power saving menu tab, I don't remember the exact name but if was fairly obvious from what I recall.
RE: T41S screen blinking - Prozper - 08-19-2018 07:29 PM
(08-17-2018 02:45 PM)jolouis Wrote: There is an option to wake the screen when BLF states change. If you are using BLFs that might be the issue. Check the under the power saving menu tab, I don't remember the exact name but if was fairly obvious from what I recall.
Ok I remember I set BLF's on some phones. I will be on site tomorrow and check!