T46S provisioning direct_pickup_code - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T46S provisioning direct_pickup_code (/showthread.php?tid=42026) |
T46S provisioning direct_pickup_code - emdwaem - 08-13-2018 08:18 AM Hi, iam using T46S with Firmware Version 66.83.0.35 , after factory reset it field : features.pickup.direct_pickup_code = is empty , when i provision it with some value , for example: features.pickup.direct_pickup_code = ** it is successfully setup, but when i provision it again with empty value : features.pickup.direct_pickup_code = value will not change . Using site to configure this param we can setup it as empty. Is there any way to setup this as empty value using provisioning or this is some bug ? Thank you for any help Marcin RE: T46S provisioning direct_pickup_code - jolouis - 08-17-2018 02:34 PM Try using %NULL% as the value, and see if that clears it. RE: T46S provisioning direct_pickup_code - emdwaem - 08-18-2018 09:08 AM (08-17-2018 02:34 PM)jolouis Wrote: Try using %NULL% as the value, and see if that clears it. thank you, works now |