Yealink Forums
[SOLVED] T48S AutoProvisioning ldap.host not used - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: [SOLVED] T48S AutoProvisioning ldap.host not used (/showthread.php?tid=41970)



[SOLVED] T48S AutoProvisioning ldap.host not used - BryanLee - 07-18-2018 05:09 PM

I am auto-provisioning some T48S firmware 66.81.0.70. I have a valid ldap.host parameter, but the phone is not using it. After provisioning (or after manually uploading the CFG via the web interface), the ldap host setting is set to 0.0.0.0.

Any ideas?


RE: T48S AutoProvisioning ldap.host not used - BryanLee - 07-19-2018 03:13 PM

(07-18-2018 05:09 PM)BryanLee Wrote:  I am auto-provisioning some T48S firmware 66.81.0.70. I have a valid ldap.host parameter, but the phone is not using it. After provisioning (or after manually uploading the CFG via the web interface), the ldap host setting is set to 0.0.0.0.

Any ideas?

Updating to the most recent firmware 66.83.0.35 fixed the ldap.host setting.