T48S Autoprovision admin password - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T48S Autoprovision admin password (/showthread.php?tid=41886) |
T48S Autoprovision admin password - srcurtis - 06-12-2018 11:48 AM Hi I would like to know how to auto provision the admin password on the T48S. I'm running firmware 66.83.0.35. I've created a mac specific .boot file, phone general .cfg and phone specific .cfg. TFTP server returns all three files: Jun 12 12:38:07 voip3 in.tftpd[17710]: RRQ from 192.168.91.90 filename 805ec00116cd.boot Jun 12 12:38:07 voip3 in.tftpd[17711]: RRQ from 192.168.91.90 filename y000000000065.cfg Jun 12 12:38:07 voip3 in.tftpd[17712]: RRQ from 192.168.91.90 filename 805ec00116cd.cfg In my y000000000065.cfg file I have the following (as a result of various attempts to set admin password): Code: #!version:1.0.0.1 None of these seem to do the trick. Can you please let me know what the correct syntax is or suggest what I may be doing wrong? Thanks Steve RE: T48S Autoprovision admin password - complex1 - 06-12-2018 12:23 PM (06-12-2018 11:48 AM)srcurtis Wrote: Hi Hi, Please try this syntax in the config file: Code: #!version:1.0.0.1 Hope this will help. RE: T48S Autoprovision admin password - srcurtis - 06-12-2018 01:21 PM Hi Frank It turns out that I was being an idiot editing my general.cfg file on the wrong server! I can confirm that your provided parameters work just fine for setting the admin password. Sorry to have troubled you. Best regards Steve RE: T48S Autoprovision admin password - complex1 - 06-12-2018 01:58 PM (06-12-2018 01:21 PM)srcurtis Wrote: Hi Frank Hi Steve, It was no trouble at all and I’m glad to read you have solved the issue. |