BToE for CP960 - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: CP920/CP960 (/forumdisplay.php?fid=60) +--- Thread: BToE for CP960 (/showthread.php?tid=41855) |
BToE for CP960 - Graham25 - 05-30-2018 03:45 AM Can you please tell me when the CP960 will get BToE functionality. This datasheet from April 2018 says its "Pending". http://www.yealink.com/upfiles/products/201804/1524118424029.pdf We are very keen to test this for our meeting room solutions. Thanks, Graham RE: BToE for CP960 - Rizzon - 10-12-2018 08:18 AM +1 same question here RE: BToE for CP960 - mikhail - 11-13-2018 03:59 PM +1 same question here else when to expect? or FIX pairing with PC (win10) via BLUETOOTH mode "Yealink Speakerphone" - disconnected after +- 3-5 min (but shows as sucsessfully connected)!!!!PLEASE!! now only works stably " Yealink Headset" mode, but sound from this is very low quality.. BToE!! please....! implore you! connecting to PC via USB - BAD IDEA! USB-port It is not located correctly - it will be broken very quickly, as this device cannot be nailed to the table !!!! PLEASE FIX Bluetooth Yealink Stereo Speakerphone MODE or add the BToE for this device!!!!!!!!! RE: BToE for CP960 - Graham25 - 11-13-2018 09:13 PM (11-13-2018 03:59 PM)mikhail Wrote: +1 According to the Specifications tab on this Yealink site https://www.yealink.com/products_107.html the CP960 Skype for Business edition now supports BToE. The release notes found below, also state that BToE has been added as a feature for the Skype for Business edition. http://download.support.yealink.com/download?path=ZIjHOJbWuW/DFrGTLnGypk7VpHCbeJohYxokirp8IWyIDX5A19mfqpYSsI88gINisykz89l1mZmlcy9uc6l9xhhLtvszTplusSymbolcrcdmKxYmaHH1IHQplusSymbolVSjMA3sKhS4haJdtev4Sl6rmkYPhVPKHMMBC7ru/8HQUKdalVJiK7Z8Y5Pc9/6XBfdFKih8KIKnCe6qYc |