lang.gui = English in local cfg file - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: FAQs etc (/forumdisplay.php?fid=38) +--- Forum: V73 Official Firmware (/forumdisplay.php?fid=41) +--- Thread: lang.gui = English in local cfg file (/showthread.php?tid=41649) |
lang.gui = English in local cfg file - dudoankq - 03-27-2018 04:44 AM I just upgraded to V73 for a lot of T46G. I really love the new "local conf" feature. I have auto_provision.custom.protect=1, but I don't yet use the sync. (auto_provision.custom.sync=0 ) I have the issue that the phone always adds "lang.gui = English" to the local conf file when autoprovisioning. Even resetting the phone, or editing and reimporting the local config, doesn't help, as after reprovisioning, the local conf file always reads: Quote: #!version:1.0.0.1 lang.gui = English We are using the German language and the autoprovision file is setting lang.wui = %%langwebUI%% lang.gui = %%langlcdUI%% which both are "German". The local conf file is not saved on the server. Is this a known issue? Or am I doing something wrong? If the issue is known what is a temporary solution? I tested adding "lang.gui = German" to the local conf file (via the webinterface or the GUI) and this does work, the language stays German even after reprovisioning. But I will have to do this for each of the 250 phones, and we got some englisch or chinese speaking people here, too, so I don't want to overwrite their settings. And I will have to repeat the procedure for every new or completely resetted phone too. So I am looking of a more long-term solution. |