+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46S - WIFI & BT dongle (/showthread.php?tid=41643)
T46S - WIFI & BT dongle - lolvince - 03-26-2018 08:25 AM
Hello,
I use T46S with the latest firmware (66.82.0.30).
I have a USB hub that allows me to connect the BT40 and BF40.
however, I encounter errors when I receive an incoming call, the phone freezes for about 10 seconds, then it works again, or it finally crashes and reboots ...
this happens from the moment the wifi dongle is connected to the phone, turned off or on, it does not change anything.
an idea ?
RE: T46S - WIFI & BT dongle - lolvince - 03-29-2018 02:57 PM
(03-26-2018 08:25 AM)lolvince Wrote: Hello,
I use T46S with the latest firmware (66.82.0.30).
I have a USB hub that allows me to connect the BT40 and BF40.
however, I encounter errors when I receive an incoming call, the phone freezes for about 10 seconds, then it works again, or it finally crashes and reboots ...
this happens from the moment the wifi dongle is connected to the phone, turned off or on, it does not change anything.
an idea ?
I ended up finding the solution to my problem, the USB3 Hub, 3 ports, was replaced by a USB hub 3 powered, and it worked.
I also tested with an old USB 1.1 Hub without external power, and now everything is functional!
therefore problem of power supply and / or USB compatibility 3
RE: T46S - WIFI & BT dongle - complex1 - 03-29-2018 06:34 PM
(03-29-2018 02:57 PM)lolvince Wrote:(03-26-2018 08:25 AM)lolvince Wrote: Hello,
I use T46S with the latest firmware (66.82.0.30).
I have a USB hub that allows me to connect the BT40 and BF40.
however, I encounter errors when I receive an incoming call, the phone freezes for about 10 seconds, then it works again, or it finally crashes and reboots ...
this happens from the moment the wifi dongle is connected to the phone, turned off or on, it does not change anything.
an idea ?
I ended up finding the solution to my problem, the USB3 Hub, 3 ports, was replaced by a USB hub 3 powered, and it worked.
I also tested with an old USB 1.1 Hub without external power, and now everything is functional!
therefore problem of power supply and / or USB compatibility 3
Hi,
Glad to see the issue has been resolved and thank you for sharing your solution.