+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: DND is not working - T46G phone rings anyway (SOLVED) (/showthread.php?tid=41625)
DND is not working - T46G phone rings anyway (SOLVED) - Dirk999 - 03-19-2018 03:53 PM
I have an Elmeg (Teledat) hybird 300 PABX. I connected my T46G with the hybird. It´works all fine except dnd.
The T46G runs on the newest 28.83.0.10 firmware. I configured dnd on the WEB UI but the phone rings anyway.
There is no "Feature key syncronisation" on the WEB GUI wich could be disabled/enabled. This was a solution here for this problem. So this solution won´t help me.
RE: DND is not working - T46G phone rings anyway - anonymous1712222627012 - 03-22-2018 08:35 AM
Dear Customer,
Would you please follow below FAQ to reproduce the issue by turning off and on the DND, and then making a call to it.
http://support.yealink.com/faq/faqInfo?id=707
When it is repopulated, please send me the config.bin, pcap trace, and syslog on level 6.
Kind Regards
Samuel Wang
RE: DND is not working - T46G phone rings anyway - Dirk999 - 03-23-2018 03:15 PM
Dear Mr. Wang,
the problem is solved. On the WEB GUI you can´t find "Feature key syncronisation".
But you find it in the configuartion file. There I set the option "0". Loaded the new configuration file to the phone an now DND works perfect!!!
Thank you for your help.
Kind regards
Dirk999