T48 - EDK not working - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T48 - EDK not working (/showthread.php?tid=41624) |
T48 - EDK not working - ElliotJ29 - 03-19-2018 01:59 PM Hi Guys, I see there is a new feature called enhanced dss keys which I'm trying to get working but not having much luck. I have set features.enhanced_dss_keys.enable=1 in the y0000 cfg file and browsed to the phone and configured the following custom key; This should dial 555 wait for connection and then enter *5000# as DTMF 555$Tinvite$$Cwc$*5000#$Tdtmf$ I've been having a play around and it looks like the handset does nothing after dialling 555. I was wondering if you have seen this issue before? or am i missing something? I have tried all firmware above 35.81. I see another user posted about this but looked like it was never resolved. Thanks, Elliot RE: T48 - EDK not working - anonymous1712222627012 - 03-22-2018 08:37 AM (03-19-2018 01:59 PM)ElliotJ29 Wrote: Hi Guys, Hi Elliot, This is Paul from Yealink Technical Support Team, nice to meet you. About this issue, please follow below FAQ to provide the pcap capture, Level 6 syslog and Config.bin t us to do further troubleshooting: http://support.yealink.com/faq/faqInfo?id=707 Besides, please provide the configuration file y0000 cfg to us. Thanks in advance. Best Wishes Paul |