USB call recording - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Configuration (/forumdisplay.php?fid=24) +--- Thread: USB call recording (/showthread.php?tid=41551) |
USB call recording - David D - 02-19-2018 02:19 AM Hi everyone, I am new to the forums so i hope this is the right place for this topic. I am trying to setup USB Recording for the T46S and T42S phones. From what i can tell from the Admin guides there should be a parameter that needs to be changed in the config generator tool 'features.usb_call_recording.enable'. Thing is i don't see this parameter in the config generator tool I am using. I am using config generator tool version 2.0.0.13. I don't see any newer version of the Yealink site. Cheers RE: USB call recording - Fraukas2 - 02-19-2018 06:43 PM (02-19-2018 02:19 AM)David D Wrote: Hi everyone, Hello ! The provision tool provided is indeed outdated. But you can still use all the fields in the tool to create a template and then manually edit the config file generated to add the line: features.usb_call_recording.enable=1 RE: USB call recording - David D - 02-20-2018 03:05 AM (02-19-2018 06:43 PM)Fraukas2 Wrote:(02-19-2018 02:19 AM)David D Wrote: Hi everyone, Hi Fraukas2, Thanks for the advice, now that you have pointed that out to me i can't believe i didn't think of that myself! I'll test this out and let you know how it went. Thanks again. RE: USB call recording - Fraukas2 - 02-20-2018 03:09 AM Hehehe Don’t worry, it happens. RE: USB call recording - Johnny88 - 03-08-2018 10:04 AM Let you finish soon. I hope the caregiver comes to the rescue with this problem. In addition to deleting members from the forum. goldenslot ruby888 RE: USB call recording - YOVU Cloud - 05-15-2018 07:00 PM Also trying to figure this out.. getting a red X on the top right of the screen when I hit the button. Here is what I've figured out so far: #This one should turn on the feature.. I read it must be done from a config features.usb_call_recording.enable=1 #This is to put the button on line button 10. programablekey.10.type=25 programablekey.10.line=1 programablekey.10.label=Record Also ready it must be FAT32.. but something is still missing... |