Programming the "Message" Button - T46g - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Programming the "Message" Button - T46g (/showthread.php?tid=41510) |
Programming the "Message" Button - T46g - Bernhard77 - 01-31-2018 03:16 PM Hi! Is it possible to program the "Message" Button on my T46g ? I need the switchboard mailboxnumber on the phone. Many Thanks, Bernhard RE: Programming the "Message" Button - T46g - complex1 - 01-31-2018 03:46 PM (01-31-2018 03:16 PM)Bernhard77 Wrote: Hi! Hi Bernhard, Yes, this is possible. Please login in the phone and go to “Account > Accountx > Advanced” and fill “Voice Mail” field with the desired number, or use auto provisioning. #Configure the voice mail number for account X. voice_mail.number.X = Hope this will help. RE: Programming the "Message" Button - T46g - Bernhard77 - 01-31-2018 04:59 PM Thank you so much. Via Webinterface its really easy. :-) But when i change it for Auto Provisioning. Its for all of our T46g phones. I just needed this programming for 4~5 people. It hink after Re-Auto Provisioning this setting is gone. But its ok. The setting is really cool and easy to change. Thanks!!! Bernhard |