User-Agent not consistent across models - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: User-Agent not consistent across models (/showthread.php?tid=41504) |
User-Agent not consistent across models - ABP_Support - 01-30-2018 04:06 PM How can I get the phone to present the MAC as part of the SIP User-Agent ? It does well on the T46 and after a lot of development using that feature we found out that other models don't. Even with same firmware version. i.e. The T29G uses this header: User-Agent: Yealink SIP-T29G 46.82.0.20 The T46 uses this hearder: User-Agent: Yealink SIP-T46S 66.82.0.20 001565beff65 Henry RE: User-Agent not consistent across models - Evan_Yealink - 02-01-2018 01:56 AM Dear Henry, This is Evan from Yealink Support team, nice to know you! For this question, may I know that how your business or user experience is affected without this feature(User-Agent without MAC address)? And do you mean the format of User_Agent is like below? User-Agent: Yealink SIP-T46S 66.82.0.20 001565beff65 or User-Agent: Yealink SIP-T46S 66.82.0.20 00:15:65:be:ff:65 If so, the auto provision parameter as below shown may help: sip.mac_in_ua= 2 ( V81 or higher ) 0:Without MAC 1:MAC address separated by colon 2:MAC address not separated by colon Please let me know if anything I could help. Hope you have a nice day! Best Regards, Evan You |