Yealink Forums
Yaelink android application development configuration tutorial - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T5X Series (/forumdisplay.php?fid=58)
+--- Thread: Yaelink android application development configuration tutorial (/showthread.php?tid=41503)

Yaelink android application development configuration tutorial - emin - 01-30-2018 10:15 AM

Hi,

I am using Yaelink T58V and I want to develop application works on T58V. I had tried to enable developer mode on device but had no luck. I had found this document and it says I need to add custom.static.system_mode_selection=1 parameter to configuration file.

I believe my problem is that I can't change configuration of T58V.

I tried to export current config from Settings>Configuration from device settings (As in the screen shot below). Then add custom.static.system_mode_selection=1 param and import it. It doesn't work.
[Image: MkPFHHM.png]

Then I implement a simple web server to send config file to T58V. Then add my server url to settings UI (As in the screen shot below). It doesn't work.

[Image: pdbxSXa.png]

Here is the config file I was trying to send (or upload):developer-all.cfg


Is there a good tutorial for that changing configurations? I have been searching for all day but couldn't find any good document or tutorial for that purpose. Can you help with that?

Thanks.

RE: Yaelink android application development configuration tutorial - anonymous1718628087441 - 02-01-2018 06:37 AM

(01-30-2018 10:15 AM)emin Wrote:  Hi,

I am using Yaelink T58V and I want to develop application works on T58V. I had tried to enable developer mode on device but had no luck. I had found this document and it says I need to add custom.static.system_mode_selection=1 parameter to configuration file.

I believe my problem is that I can't change configuration of T58V.

I tried to export current config from Settings>Configuration from device settings (As in the screen shot below). Then add custom.static.system_mode_selection=1 param and import it. It doesn't work.
[Image: MkPFHHM.png]

Then I implement a simple web server to send config file to T58V. Then add my server url to settings UI (As in the screen shot below). It doesn't work.

[Image: pdbxSXa.png]

Here is the config file I was trying to send (or upload):developer-all.cfg


Is there a good tutorial for that changing configurations? I have been searching for all day but couldn't find any good document or tutorial for that purpose. Can you help with that?

Thanks.


Dear Customer,

This is Paul from Yealink Technical Support Team, nice to meet you.

About how to install APP in T58V, please refer to attached "Installing the Applications on Yealink Smart Media Phones" guide.


Best Wishes

Paul

Find your answers via Wiki/FAQ：http://support.yealink.com

Submit a Ticket：https://ticket.yealink.com

Website： http://www.yealink.com