T38G auto-provisioing. How to clear out value of a text parameter - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T3xP Series (/forumdisplay.php?fid=22) +---- Thread: T38G auto-provisioing. How to clear out value of a text parameter (/showthread.php?tid=4143) |
T38G auto-provisioing. How to clear out value of a text parameter - mdu113 - 07-22-2015 04:50 AM Hello, This may be a silly question, but I seem to be unable to figure it out. I'm trying to auto-provision T38G, firmware 38.70.1.33, and I don't see how I can clear out a text value after it has been initially set. Let me explain. For example in mac.cfg I set: voice_mail.number.2 = 138 After reboot the phone recognizes this setting and I see "138" as vm number for account 2. Now I want to remove this setting so that account 2 has no vm number configured. If I change mac.cfg as follows: voice_mail.number.2 = then phone just ignores it and account 2 still has vm number set to 138. If I set it to be: voice_mail.number.2 = " " then phone interprets that literally I have vm number set to "quote-space-quote". What should I do to clear up that value? Thanks, Michael RE: T38G auto-provisioing. How to clear out value of a text parameter - Yealink_Michael - 07-22-2015 05:23 AM hi you can do a factory reset to the phone , then it will set to empty . for the auto provision sentence , i will check and reply to you quickly RE: T38G auto-provisioing. How to clear out value of a text parameter - mdu113 - 07-22-2015 05:28 AM Sure, but are there another way? I'm ITSP considering using yealink phones. I need an easy way to change phone configuration without physical access to the phone. Thanks, Michael RE: T38G auto-provisioing. How to clear out value of a text parameter - cptjack - 07-22-2015 06:02 AM You can try %NULL% or !NULL! to empty the value and revert to default. See here I can't test it on the T38G right now. Just know the T3x model lag in features, bug fixes and firmware updates. T4x and T2x have much better support, which should be a better choice in the long run. RE: T38G auto-provisioing. How to clear out value of a text parameter - mdu113 - 07-22-2015 06:12 AM That works! Thanks a lot. Thanks for the advice too. I'll be looking at other phone models as well. Best regards, Michael RE: T38G auto-provisioing. How to clear out value of a text parameter - cptjack - 07-22-2015 06:27 AM You're welcome. Make sure to read this popular T38 thread to avoid disappointment... |