+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Wishlist (/forumdisplay.php?fid=13)
+--- Thread: W52H Speed Dial - Paging (/showthread.php?tid=41410)
W52H Speed Dial - Paging - GIWM - 12-20-2017 02:15 PM
We would like to be able to program a speed dial button to an item in the paging list. This is on a W52H.
Thank you!
RE: W52H Speed Dial - Paging - Evan_Yealink - 12-26-2017 06:46 AM
Dear Customer,
Good day!
Sorry to tell you that the speed dial can't be set in the paging list. Multicast paging allows DECT IP phones to send or receive Real-time Transport Protocol (RTP)
streams to/from the pre-configured multicast address(es) on the desired channel without involving SIP signaling.
For Speed dial, please refer to the guide I attached. On the page 46.
By the way:
Please raise your issue or question in our professional ticket system (https://ticket.yealink.com) to get a quick response.
How to Get Your Ticket Account？
•Please follow this guide http://support.yealink.com/faq/faqInfo?id=678 to register your ticket account.
•Any problem on registration please contact support@yealink.com
How to use Yealink Ticket System?
• Please follow Yealink Ticket Quick Guide: http://support.yealink.com/faq/faqInfo?id=703
Enjoy Yealink Ticket Service!
Any question,freely to let us know.
Best Regards,
Evan You
RE: W52H Speed Dial - Paging - GIWM - 01-04-2018 06:57 PM
I know it can't currently be done. That's why I posted it in Wishlist.
RE: W52H Speed Dial - Paging - Evan_Yealink - 01-05-2018 01:57 AM
Dear Customer,
Thanks for your reply.
Please raise your request in our professional ticket system (https://ticket.yealink.com) to get a quick response. Also please help provide more information for us so we can understand the issue better.
Then we will distribute this case to related colleague and forward the feature request to the PM and R&D to evaluate.
Thanks in advance.