+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: How to disable the Dial-Upon-Lift feature (/showthread.php?tid=41301)
How to disable the Dial-Upon-Lift feature - Jeremy17 - 11-14-2017 06:43 PM
Let's say I want to call 1-800-123-4567. Without lifting the handset, I start dialing "180". I then realize that the phone is really loud because it's playing the tones over the speakerphone, and potentially annoying my neighbors or a client sitting in my office. So I lift the handset to turn off speakerphone, and continue dialing. However, as soon as I lift the handset, the phone Sends "180" instead of letting me continue dialing the rest of the number.
How do I turn that feature off? I do not want the phone to Send the digits until I either press Send or wait for the dialing timeout. I do not want lifting the handset to instantly Send my partially dialed number.
Thanks.
RE: How to disable the Dial-Upon-Lift feature - Evan_Yealink - 12-11-2017 01:33 AM
Dear Jeremy,
Good day!
For your question, to disable the IP phone to play a key tone when a user presses any key on your phone keypad may help.
Key tone allows the IP phone to play a key tone when a user presses any key.
To configure a key tone via web user interface:
1. Click on Features->Audio.
2. Select the desired value from the pull-down list of Key Tone.
3. Select the desired value from the pull-down list of Send Tone.
[attachment=4796]
Or Phone User Interface:
Menu->Basic->Sound->Key Tone
Any question, freely to let me know.
Regards,
Evan You