+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46G and DTMF tones not recognized (/showthread.php?tid=41281)
T46G and DTMF tones not recognized - tdr01 - 11-10-2017 02:16 PM
Hi all,
I`m using my T46G behind a FritzBox 7490 with the latest FW.
So far so good.
When I would like to forward the call to another number(e.g. mobile), I`m getting always "Line busy"
For the Telekom in Germany I can forward it with "*21*0170000000#
It worked with a previous FW on the Yealink, but I can`t remember what I changed.
Hope you show me the rightway.
Thx
Thomas
RE: T46G and DTMF tones not recognized - complex1 - 11-10-2017 06:37 PM
(11-10-2017 02:16 PM)tdr01 Wrote: Hi all,
I`m using my T46G behind a FritzBox 7490 with the latest FW.
So far so good.
When I would like to forward the call to another number(e.g. mobile), I`m getting always "Line busy"
For the Telekom in Germany I can forward it with "*21*0170000000#
It worked with a previous FW on the Yealink, but I can`t remember what I changed.
Hope you show me the rightway.
Thx
Thomas
Hi Thomas,
Please check "DTMF Type" is "RFC2833" and "DTMF Payload Type" is "101"
WUI:
Account > AccountX > Advanced
Provisioning:
account.X.dtmf.type = 1
account.X.dtmf.dtmf_payload = 101
Hope this will help.
RE: T46G and DTMF tones not recognized - tdr01 - 11-12-2017 11:34 AM
Hello,
DTMF Type is RFC2833
DTMF Payload 101
But I can`t find the secound settings
Provisioning:
account.X.dtmf.type = 1
account.X.dtmf.dtmf_payload = 101
I have only the point
Settings > Auto Provision
and here I can`t find anything with DTMF.
Can you say me where I can find it?
RE: T46G and DTMF tones not recognized - complex1 - 11-12-2017 11:56 AM
(11-12-2017 11:34 AM)tdr01 Wrote: Hello,
DTMF Type is RFC2833
DTMF Payload 101
But I can`t find the secound settings
Provisioning:
account.X.dtmf.type = 1
account.X.dtmf.dtmf_payload = 101
I have only the point
Settings > Auto Provision
and here I can`t find anything with DTMF.
Can you say me where I can find it?
Hi,
Sorry I was not clear enough…
You have two options to setup the DTMF settings
1. Manually by Web User Interface
2. Automatically by Provisioning
By provisioning I meant the parameters in the provisioning template…
If you provisioning the phone, you can use these parameters.
You don’t find them in the phones WUI.
Hope this will help.
RE: T46G and DTMF tones not recognized - tdr01 - 11-12-2017 04:18 PM
ok, understood.
I`ve made it in the WUI.
Didn`t work.