+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Export CFG configuration file Issue (/showthread.php?tid=41275)
Export CFG configuration file Issue - Fraukas2 - 11-08-2017 06:19 PM
Hello everyone !
I've got a couple of T46G with the firmware 28.81.0.20. When I go in Settings/Configuration, do the "Export CFG configuration file" with "All Settings" and press "Export", I get to save or run the file "00156590fcfd-all.cfg". When I open it with Notepad++ or regular Notepad, the document is empty.
Checking the properties of the file, i get a 0Ko file.
Doing the same but for "Non-static Settings", i get the file "00156590fcfd-non-static.cfg" which is 0 Ko again and still empty.
Doing the same but for "Static Settings", i get a the file "00156590fcfd-static.cfg" which is 17 lines long. I guess it is probably correct.
Is this supposed to be like this ?
I just checked with a T46G with firmware version 28.82.0.20 and I get a cfg file with about 300 lines in it.
Seems to be solved in the new firmware.