+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T23G Can't provision volume (/showthread.php?tid=4127)
T23G Can't provision volume - jolouis - 07-17-2015 11:42 PM
Running into a strange issue with T23G phones recently. We have a customer who through some integration with other systems requires us to remotely enable/disable the ringer on the phones. In the past we had T22 sets running V72 firmware and were able to achieve this by using PushXML and the following provisioning:
voice.ring_vol=0 #Turn ringer off
However with the T23G, even on latest firmware 80.0.60, that does not seem to have any effect, volume always remains at whatever the user set it to using the volume key.
Please confirm on your end and let me know.