Yealink Forums
Call Park Mode transfer on T48G - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Call Park Mode transfer on T48G (/showthread.php?tid=41260)



Call Park Mode transfer on T48G - jasonblewis - 11-03-2017 05:29 AM

Hi,

on the T42G phones I can set call park mode to Transfer via the webif. On the T48G I am not given Transfer as an option, only FAC or XSI. is there some way to get the transfer mode of parking calls on the T48G?

thanks in advance


RE: Call Park Mode transfer on T48G - Fraukas2 - 11-08-2017 06:04 PM

What is your firmware version on the T48G ?


RE: Call Park Mode transfer on T48G - Aishion_Yealink - 11-09-2017 01:26 AM

(11-03-2017 05:29 AM)jasonblewis Wrote:  Hi,

on the T42G phones I can set call park mode to Transfer via the webif. On the T48G I am not given Transfer as an option, only FAC or XSI. is there some way to get the transfer mode of parking calls on the T48G?

thanks in advance

Hi,

I think you are running on Broadsoft firmware which the third number is 193, example 35.81.193.1, am I right?

Can I know are you using Broadsoft PBX? If not, you can kindly upgrade to neutral firmware, you can download the firmware in below link:

T48G: http://download.support.yealink.com/download?path=upload%2Fattachment%2F2017-9-13%2F6%2Fbe23bac3-800a-4845-8d3c-005fdfa5acfc%2FT48-35.82.0.20.rom

Please refer to below FAQ to upgrade the firmware:

http://support.yealink.com/faq/faqInfo?id=9

Any question, please do not hesitate to get in touch with us.