T23G custom logo - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Configuration (/forumdisplay.php?fid=24) +--- Thread: T23G custom logo (/showthread.php?tid=41252) |
T23G custom logo - apant - 10-31-2017 10:47 AM Hello. I want to add a custom logo to my T23G phones but when i try to upload the .dob file I get the error "Upload failed! The size is too big!". The size of the .dob file is 5k and it is 132x64 pixels. I also tried a smaller one but I got the same error message. All tutorials I read are about T22,T26,T28,T32 and T38. T23 is not mentioned anywhere but the option for a custom logo exists on the latest firmware. Is it a fake option or I should do something else to work? Thank you. RE: T23G custom logo - Fraukas2 - 11-08-2017 06:08 PM Try with a jpg file instead of a dob. Also, what is your firmware version ? I always use this autoprovision command for this Code: wallpaper_upload.url = http://blah.blah.blah.com/blah.jpg RE: T23G custom logo - apant - 11-11-2017 08:30 AM When I use a jpg I get the message "The file format must be .dob!" Version Firmware Version 44.82.0.20 Hardware Version 44.0.0.16.0.0.0 RE: T23G custom logo - complex1 - 11-11-2017 09:04 AM (11-11-2017 08:30 AM)apant Wrote: When I use a jpg I get the message "The file format must be .dob!" Hi For T23G the supported log file format and resolution are: Format: .dob Resolution: <=132*64 2 gray scale Please read the Admin Man, page 248 "How to Customizing a Logo" http://download.support.yealink.com/download?path=upload%2Fattachment%2F2017-11-3%2F3%2Fd18c8ccb-b23f-4c5d-b1d5-94a491bedea7%2FYealink_SIP-T2_Series_T19%28P%29%20E2_T4_Series_T5_Series_IP_Phones_Administrator_Guide_V82_22.pdf The mentioned PictureExDemo tool can be downloaded from here http://download.support.yealink.com/download?path=upload/attachment/2015-3-12/3/36506fad-f29e-4336-86ce-e81eba6bd413/HowtochangethelogoofYealinkPhonesRev_610-20424946725.zip Hope this will help. RE: T23G custom logo - apant - 11-11-2017 09:08 AM Thanks Frank but I have already tried <=132*64 2 gray scale dob and the error is the one I posted. "Upload failed! The size is too big!" RE: T23G custom logo - complex1 - 11-11-2017 09:36 AM (11-11-2017 09:08 AM)apant Wrote: Thanks Frank but I have already tried <=132*64 2 gray scale dob and the error is the one I posted. "Upload failed! The size is too big!" Mmmmm, sorry I can't help you any further. For more support, please contact support@yealink.com |