Yealink Forums
SNMP - T29G - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: SNMP - T29G (/showthread.php?tid=41222)



SNMP - T29G - Ricardo A B - 10-18-2017 06:28 PM

Hi,

I'm new in the YEALINK IP PHONES, so I have a doubt with T29G support to SNMP.

If no, what is an alternative way to monitoring this phone?

I need to monitoring at least 250 Yealink T29G Phones.

NOTE: The firmware of phone is: 46.81.0.25

Regards,

Ricardo Vieira


RE: SNMP - T29G - complex1 - 10-18-2017 07:02 PM

(10-18-2017 06:28 PM)Ricardo A B Wrote:  Hi,

I'm new in the YEALINK IP PHONES, so I have a doubt with T29G support to SNMP.

If no, what is an alternative way to monitoring this phone?

I need to monitoring at least 250 Yealink T29G Phones.

NOTE: The firmware of phone is: 46.81.0.25

Regards,

Ricardo Vieira

Hi,

Yealink phones do not support the SNMP feature, because of the limitation of the phone memory and its very limited support.

It is recommend using TR069 which supports monitoring much phone status and configuring almost all of phone setting to achieve a central management.

Hope this will help.