T48S Settings - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T48S Settings (/showthread.php?tid=41221) |
T48S Settings - Gianb - 10-18-2017 02:48 PM I have downloaded the most recent SFB Firmware 66.9.0.25 for the T48S and am still having issues with the phone retaining it's settings. The Powersaving mode will not stay disabled, the Time constantly reverts back to 24 hour mode and the phone lock resets to 10 minutes. When I change the settings they may last a few hours and then they all reset. I really do not feel I should have to reprogram a new phone to save it's settings on a daily basis. RE: T48S Settings - Klaus_Yealink - 10-25-2017 01:24 AM Hello, For this issue, I suggest you contact your server provider, check if there anything configuration in server side, so that phone will sync the settings from the server side. If you can not figure out from server side, please export the level 6 log to server side, then we will do a further analyze. please download the guide from below link: http://ftp.yealink.com/?ShareToken=9AC1E9A61985FE92748B0CDC59BF10C9DA5D5BB6 BR klaus RE: T48S Settings - Gianb - 10-25-2017 02:38 PM (10-25-2017 01:24 AM)Klaus Wrote: Hello, Klaus, This is not a Microsoft SFB Server Side Issue. All this happened after the latest Firmware upgrade. How can the Server change the Power Saver and Lock Time settings on the phone every 8 hours? The phone is not retaining it's configuration, it simply resets any changes made after a certain amount of time. Also 3CDaemon is no longer available, I can find the downloads but it does not install, is there another program to use? Thank you, Gian RE: T48S Settings - Klaus_Yealink - 10-31-2017 03:54 PM If you set configuration in server side as well, phone will sync server configuration wiht period time, so it will change, so that I suggest you check your server configuration firstly. you can download 3CD from internet, then try to get the level 6 log. BR klaus RE: T48S Settings - AdamL - 11-22-2017 09:04 AM I have the same issue with my T48S on O365. Every day, I need to readjust BToE and phone lock. Is there any solution to that? RE: T48S Settings - Klaus_Yealink - 12-04-2017 03:45 PM Hi, please help get the level 6 log, then create a ticket, we will follow up. BR klaus RE: T48S Settings - Gianb - 12-04-2017 03:54 PM (12-04-2017 03:45 PM)Klaus Wrote: Hi, Please re-send instructions to create the Level 6 log. RE: T48S Settings - Klaus_Yealink - 12-29-2017 09:25 AM Hi Gianb, Please download from below link: http://sfyms.yealink.com/?ShareToken=4B8904EDF0535717D527FD1FBB3A311BBF75AEB5 BR Klaus RE: T48S Settings - Rickology - 02-08-2018 06:45 PM These settings can easily be changed on 0365 SFB but running the following command PS C:\Users\RMonz> Get-CsIPPhonePolicy Identity : Global UserDialTimeoutMS : 5000 KeyboardLockMaxPinRetry : 5 PrioritizedCodecsList : G722_8000;PCMU;PCMA;G729;G722_8000 EnablePowerSaveMode : False PowerSaveDuringOfficeHoursTimeoutMS : 900000 PowerSavePostOfficeHoursTimeoutMS : 300000 EnableOneTouchVoicemail : True DateTimeFormat : 12 EnableDeviceUpdate : True EnableExchangeCalendaring : True EnableBetterTogetherOverEthernet : True BetterTogetherOverEthernetPairingMode : Auto LocalProvisioningServerUser : PlcmSpIp LocalProvisioningServerPassword : LocalProvisioningServerAddress : LocalProvisioningServerType : FTP In order to connect into o365 through powershell you need to run the following commands: Import-Module SkypeOnlineConnector <---this requires the powershell addon for Online Skype connector and can be found through some google searches $cred = Get-Credential <---this will prompts for an admin credential to store is as a variable, make sure @domain.com is in the account) $session = New-CsOnlineSession -Credential $cred -Verbose Import-PSSession $session |