+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: T42G Programable Key as park call (/showthread.php?tid=41218)
T42G Programable Key as park call - jasonblewis - 10-18-2017 04:33 AM
Hi,
Is there some way to program one of the horizontal programable keys on a T42G to park a call to extension 70?
I can configure a LineKey to do it very easily and it works well, but as far as I can tell there is no way to configure this to one of the programable soft keys.
any ideas?
tia
RE: T42G Programable Key as park call - Klaus_Yealink - 10-19-2017 10:14 AM
Hello,
Please try to configure the softkey layout, then test again.
Path: webUI>>settings>>softkey layout.
BR
klaus
RE: T42G Programable Key as park call - jasonblewis - 10-19-2017 10:46 AM
Hi Klaus,
There is no option there for park call. only the following:
Empty, Mute, Swap, New Call, Switch Account, Answer, Reject. and in the Selected Softkeys column: Transfer, Hold, Conference, Cancel.
Jason
(10-19-2017 10:14 AM)Klaus Wrote: Hello,
Please try to configure the softkey layout, then test again.
Path: webUI>>settings>>softkey layout.
BR
klaus
Could it be achieved with macros somehow?
(10-19-2017 10:46 AM)jasonblewis Wrote: Hi Klaus,
There is no option there for park call. only the following:
Empty, Mute, Swap, New Call, Switch Account, Answer, Reject. and in the Selected Softkeys column: Transfer, Hold, Conference, Cancel.
Jason
(10-19-2017 10:14 AM)Klaus Wrote: Hello,
Please try to configure the softkey layout, then test again.
Path: webUI>>settings>>softkey layout.
BR
klaus
RE: T42G Programable Key as park call - Klaus_Yealink - 10-24-2017 02:13 AM
Please use auto p feature to configure below sentence :
bw.enable = 1
bw.xsi.enable = 1
then it will be ok.
BR
klaus
RE: T42G Programable Key as park call - jasonblewis - 10-26-2017 06:07 AM
Ah thanks. this is interesting. that worked I was able to added a park key. however it then asks you for the park extension. can i program the park extension too?
(10-24-2017 02:13 AM)Klaus Wrote: Please use auto p feature to configure below sentence :
bw.enable = 1
bw.xsi.enable = 1
then it will be ok.
BR
klaus