+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Volume (/showthread.php?tid=412)
Volume - VOIP - 05-02-2013 06:52 AM
What is the difference between
HandSetMicVol =
headset_send =
Thank you
RE: Volume - VOIP - 05-28-2013 10:40 PM
Anyone?
RE: Volume - kg4ysy - 05-31-2013 12:17 AM
Assuming your phone has two ports (one for handset and one for headset) I'd guess that the first is the volume of the mic on the handset and the second is some aspect that only relates to a headset that is plugged in. I might be missing the point of your question though.
RE: Volume - VOIP - 06-05-2013 11:00 PM
(05-31-2013 12:17 AM)kg4ysy Wrote: Assuming your phone has two ports (one for handset and one for headset) I'd guess that the first is the volume of the mic on the handset and the second is some aspect that only relates to a headset that is plugged in. I might be missing the point of your question though.
You are correct, I pasted in correctly-
My question is what is the difference between
HeadSetMicVol = 8
headset_send = 29
and
handset_send =
HandSetMicVol = 8
RE: Volume - kg4ysy - 06-05-2013 11:06 PM
(06-05-2013 11:00 PM)VOIP Wrote:(05-31-2013 12:17 AM)kg4ysy Wrote: Assuming your phone has two ports (one for handset and one for headset) I'd guess that the first is the volume of the mic on the handset and the second is some aspect that only relates to a headset that is plugged in. I might be missing the point of your question though.
You are correct, I pasted in correctly-
My question is what is the difference between
HeadSetMicVol = 8
headset_send = 29
and
handset_send =
HandSetMicVol = 8
In the M7 version of the provisioning files I don't see HandSetMicVol or HeadSetMicVol so I would guess that they have been replaced with handset_send and headset_send since I DO see those.
RE: Volume - VOIP - 06-11-2013 01:21 AM
I dont believe that is the case.
RE: Volume - Yealink Support - 06-11-2013 11:00 AM
(06-11-2013 01:21 AM)VOIP Wrote: I dont believe that is the case.
Hello,
These parameters are the same, so there's something wrong in our previous autop template, but now there's no problem in our latest V70 template, there are just these parameters:
#Configure the sending volume of Speaker, Handset and Headset. It ranges from 1 to 53, the default values are 25, 35, 29.
#Require reboot;
voice.handfree_send =
voice.handset_send =
voice.headset_send =
So please use our latest template with V70 firmware in your phone. You can download them from our website:
http://www.yealink.com/Upload/AutoProvisoning-17095068456.zip
Thanks.