Transfer a call - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Transfer a call (/showthread.php?tid=41176) |
Transfer a call - Falk - 10-02-2017 11:10 AM Hello For BLF, we can transfer a call without pressing the transfer button. For non-BLF destinations, we must press transfer. That is very confusing. Is it possible to bypass the transfer key? So press the speed dial, transfer and hang up? As with BLF? Best regards? Falk RE: Transfer a call - Aishion_Yealink - 10-11-2017 03:37 AM (10-02-2017 11:10 AM)Falk Wrote: Hello Dear Falk, Yes, you can also use speed dial key to transfer a call, this is a feature called Transfer Mode via Dsskey, which is available to the following DSS keys: 1.Speed Dial DSS key 2.Transfer DSS key with an assigned value 3.BLF/BLF List DSS key For more information about this feature, please kindly see below guide from page 432 - 434 : http://download.support.yealink.com/download?path=upload%2Fattachment%2F2017-10-9%2F3%2Fe84c0579-65f6-4613-802b-78206f63f7b5%2FYealink_SIP-T2_Series_T19%28P%29%20E2_T4_Series_T5_Series_IP_Phones_Administrator_Guide_V82_21.pdf If any question, please feel free to contact us. Best Regards Aishion |