+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: T41S Auto Provision Softkeys (/showthread.php?tid=41161)
T41S Auto Provision Softkeys - ITM - 09-27-2017 02:19 PM
I am trying to modify the auto provision config file to change the default Directory softkey to be a Forward softkey. I place the following in the config template.
programablekey.1.label = History
programablekey.1.line = 0
programablekey.1.type = 28
programablekey.2.label = Forward
programablekey.2.line = 0
programablekey.2.type = 2
After auto provision is complete the default History softkey is changed to FWD and the Directory remains. I want to leave the History softkey and change the Directory softkey. T41S Firmware version 66.81.0.90. What am I missing?
RE: T41S Auto Provision Softkeys - ITM - 09-27-2017 04:39 PM
Found a solution. I factory reset the phone, downgraded to 66.81.0.70, did an auto-provision and the Forward button replaced the Directory button. Was curious so I then did another factory reset and upgraded to 66.80.0.90, did another auto-provision and the Forward button replaced the Directory button.