Yealink Forums
T23G and CP860 manual time issue - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+--- Thread: T23G and CP860 manual time issue (/showthread.php?tid=41154)



T23G and CP860 manual time issue - DmitryTsyganov - 09-26-2017 03:35 PM

Hi,

I have a problem that i can't set manual time setting on T23G .
I set local_time.manual_time_enable = 1 in provisioining config file, but it still looks like "disabled" in WEB and phone Menu.
Also I tried to set I set auto_provision.custom.protect = 1 and setup Manual time via WEB and phone Menu but it lose settings after reboot.
I had the same issue with T21E P and i know that they don't have clock chip. Do T23G have clock chip and ability to set and keep manual time?

Similar problem on CP860. I set manual manual_time_enable = 1 on CP860 and phone keeps value "enable" but lose date and time after reboot
Do CP860 have clock chip and ability to set and keep manual time?

Thanks,
Dmitry


RE: T23G and CP860 manual time issue - Lucia_Yealink - 09-27-2017 05:56 AM

Dear Dmitry,

No, all of T23G, T21 E2 and Cp860 are do not have the clock chip, so when you configure the manual time, include the setting: local_time.manual_time_enable = 1, after the phone reboot, it will lose the configuration.

The parameter make no effect to this problem:auto_provision.custom.protect = 1

Best Regards,
Lucia