+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Custom Softkey XML Format (/showthread.php?tid=41133)
Custom Softkey XML Format - Cloud9phone - 09-14-2017 07:48 PM
Hello,
I have downloaded the Custom Softkey talking.xml file and modified to remove the Hold key while talking to force the user to use the assigned park keys to eliminate confusion.
Can you tell me the header that we must place in the xml file to format correctly??
such as:
#!version:1.0.0.1
or
<?xml-stylesheet type="text/xsl" href="stylesheet.xsl"?>
Larry
RE: Custom Softkey XML Format - Aishion_Yealink - 09-15-2017 08:12 AM
(09-14-2017 07:48 PM)Cloud9phone Wrote: Hello,
I have downloaded the Custom Softkey talking.xml file and modified to remove the Hold key while talking to force the user to use the assigned park keys to eliminate confusion.
Can you tell me c??
such as:
#!version:1.0.0.1
or
<?xml-stylesheet type="text/xsl" href="stylesheet.xsl"?>
Larry
Dear Larry,
For your question, it's not a must to place the header in the xml file, but please note it's a must to place a header in configure file.
[attachment=4640]
I will attached a template file for you which I successfully configured on my side. Please note to rename the configure file for your phone model: y000000000046.cfg
The below auto provision means to enable custom softkey feature, which I also write in my template.
phone_setting.custom_softkey_enable = 1
If any question, please feel free to contact us.
Best Regards
Aishion